Language Selection

English French German Italian Portuguese Spanish

AMD Ryzen Embedded SBC Review with Ubuntu 20.04

Filed under
Reviews
Ubuntu

DFI GHF51 Ryzen Embedded SBC runs about as well in Ubuntu 20.04 as it does in Windows 10. Everything basically works and performs well. Our testing shows AMD Ryzen Embedded R1606G processor to offer slightly better performance than the top of the line Intel Gemini Lake Pentium J5005 processor.

I also had one of the same issues as in Windows: one Seagate USB hard drive would not work reliability at all with transfer stalled. That’s probably just a hardware incompatibility, as the drive works with other platforms, and other USB storage devices achieve normal performance when connected to DFI SBC. I also noticed some artifacts with one 3D graphics benchmark, but those did not show up in other 3D accelerated programs.

DFI GHF51 is an impressive piece of hardware as it packs lots of CPU and GPU power in a form factor similar to Raspberry Pi 4 SBC. I’d like to thank DFI for sending a review sample. If you plan to buy in large quantities to integrate the board into your product, you could contact the company via the product page. It’s used to be available as a sample on the company’s DFI-ITOX online store for $378, but it has been taken down since last time.

Read more

More in Tux Machines

Android Leftovers

Arm Officially Supports Panfrost Open-Source Mali GPU Driver Development

Most GPU drivers found in Arm processors are known to be closed-source making it difficult and time-consuming to fix some of the bugs since everybody needs to rely on the silicon vendor to fix those for them, and they may even decide a particular bug is not important to them, so you’d be out of luck. So the developer community has long tried to reverse-engineer GPU drivers with projects like Freedreno (Qualcomm Adreno), Etnaviv (Vivante), as well as Lima and Panfrost for Arm Mali GPUs. Several years ago, Arm management was not interested at all collaborating with open-source GPU driver development for Mali GPUs, but as noted by Phoronix, Alyssa Rosenzweig, a graphics software engineer employed by Collabora, explained Panfrost development was now done in partnership with Arm during a talk at the annual X.Org Developers’ Conference (XDC 2020). Read more

Open Up: Open Source Hardware — A Chat with Carl

From a broader lens, to produce “open source hardware” means that we have developed and shared the recipe to create a high-end commercial product that can be learned from, adapted, and used by anyone else. In the same way we’ve stood on the shoulders of the Linux and open source software giants who came before us, we now get to be pioneers in developing open source hardware for those who come next. If you want to learn more how a computer is designed or how something is made, our schematics are the instructions for how to do it. It describes every step of the process, from each piece of the machine and its dimensions, to the type of aluminum used and how to bend it. It’s similar to open source software in that you can learn from the product, adapt it to your needs, and distribute it. The difference is that it requires outside equipment to produce your own version. Open hardware has become more accessible with 3-D printing, but as we found when we were making acrylic prototypes of Thelio, you reach a point where it’s time to work with metal, which presents its own challenges. You have to cut it, bend it, and paint it, all of which requires specific equipment. Read more

Today in Techrights