Language Selection

English French German Italian Portuguese Spanish

New Hardware Support in Linux

Filed under
Linux
Hardware

     

  • Nintendo Wii U Gamepad Linux Driver Support Still Pursuing Mainline - Phoronix

    It's been a half-year since talking about the Wii U gamepad driver that's been in development with mainline ambitions for supporting this wireless gamepad in conjunction with the Nintendo Wii U console. The driver has just been revised to address earlier code review comments, again renewing interest in the effort and possible mainlining in a future kernel version. 

    The Wii U game console is nearly one decade old for this IBM PowerPC powered device but still is active with some hobbyists for running Linux on the device and other retro gaming purposes. This gamepad Linux driver effort continues to be for those wanting to load Linux on the console and depends upon the wireless gamepad being connected to the console via the DRH internal chip to the Wii U that in turn exposes it as a USB device. There has though been some work towards potentially allowing it to work in the absence of the console. 

  •    

  • Linux 5.16 To Support The 2021 Apple Magic Keyboard - Phoronix

    Separate from all the ongoing Apple Silicon/M1 bring-up work for the Linux kernel, the Linux 5.16 cycle is set to support this year's Apple Magic Keyboard. 

    Via the Apple-HID driver there has been Linux kernel support for earlier versions of the Magic Keyboard to deal with device quirks and differences around this keyboard that need to be specially handled by the software for making full use of the keyboard, such as for the function (Fn) keys. 

  • Apple Silicon PCIe Driver Queued For Linux 5.16 - Phoronix

    Queued this week into the Linux PCI subsystem's "next" branch is the Apple PCIe driver needed to enable PCI Express support for Apple SoCs such as the M1. 

    The "pcie-apple" driver is written by reverse-engineering expert Alyssa Rosenzweig and Marc Zyngier while also based on discoveries by Corellium and OpenBSD developers. At this stage the Apple PCIe controller driver is less than one thousand lines of new code for bringing up the PCI Express bus with Apple SoCs. The focus has been on the Apple M1 with last year's Apple devices. 

From Tom's Hardware

  • Upcoming Linux PCIe Driver To Fully Utilize M1 Mac Mini Ports

    Further development of Apple silicon drivers for Linux continues. According to a report from Phoronix, developers are almost ready to release a new PCIe driver for M1 chips that will bring PCIe compatibility to Apple chips running the Linux operating systems. That could bring us closer to a day where we can run Linux with full compatibility on Apple's new high-performance M1 chips.

    This new PCIe driver is one of the most important drivers to be developed for the Apple M1 and Linux ecosystem: The PCI express drivers will give Linux operating systems full access to all I/O including USB ports, networking, Thunderbolt, and wireless ports on a multitude of M1 products.

    Linux support for Apple's M1 has been underway for some time now; we first saw initial support with Linux Kernel 5.13, and a real demonstration of Linux running on an M1 Mac a few weeks ago. However, the process of getting Linux compatible with Apple's M1 chips has been challenging thanks to both the ARM architecture and loads of proprietary technologies packed inside Apple Silicon.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

Windows box won't boot? SystemRescue 9 may help

The latest version of an old friend of the jobbing support bod has delivered a new kernel to help with fixing Microsoft's finest. It used to be called the System Rescue CD, but who uses CDs any more? Enter SystemRescue, an ISO image that you can burn, or just drop onto your Ventoy USB key, and which may help you to fix a borked Windows box. Or a borked Linux box, come to that. SystemRescue 9 includes Linux kernel 5.15 and a minimal Xfce 4.16 desktop (which isn't loaded by default). There is a modest selection of GUI tools: Firefox, VNC and RDP clients and servers, and various connectivity tools – SSH, FTP, IRC. There's also some security-related stuff such as Yubikey setup, KeePass, token management, and so on. The main course is a bunch of the usual Linux tools for partitioning, formatting, copying, and imaging disks. You can check SMART status, mount LVM volumes, rsync files, and other handy stuff. Usefully, there's also a full local copy of the website and all documentation, including a console-mode web browser to read it with. Read more

GNOME Shell ’Extensions Manager’ App Gets a Big Ol’ Update

Remember that new app for installing GNOME extensions I wrote about earlier this month? Well, it just got its first major update. And it adds a ton of much-requested features. For those unfamiliar with it, Extension Manager is a desktop app that lets you search, browse, manage, and install GNOME extensions without having to use a web browser. The app is built in GTK4 and libadwaita and is available to install from Flathub. Read more

today's howtos

  • Hosting my static sites with nginx

    Originally I thought that running my own servers would require a lot of maintenance and be a huge pain, but I was chatting with Wesley about what kind of maintainance their servers require, and they convinced me that it might not be that bad. So I decided to try out moving all my static sites to a $5/month server to see what it was like. Everything in here is pretty standard but I wanted to write down what I did anyway because there are a surprising number of decisions and I like to see what choices other people make.

  • How To Install Wireshark on Debian 11 - idroot

    In this tutorial, we will show you how to install Wireshark on Debian 11. For those of you who didn’t know, Wireshark is a free and open source software (FOSS) allows users to easily capture and analyze packets. In real scenarios Wireshark was useful to detect anomalies in network traffic. Wireshark can be also used to sniff traffic. Wireshark is a cross-platform software that is available for various Linux/UNIX distributions, Mac-OS, Solaris, BSD & Windows, etc. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you through the step-by-step installation of the Wireshark network protocol analyzer on a Debian 11 (Bullseye).

  • How to Install Python 3.10 (or 3.11) on CentOS - Linux Stans

    In this tutorial, we’re going to show you how to install Python (the latest version) on CentOS with step-by-step instructions. This tutorial includes instructions for Python 3.10 and Python 3.11 on CentOS 7 and CentOS 8.

  • How to Route Traffic to Docker Containers With Traefik Reverse Proxy – CloudSavvy IT

    Traefik is a leading reverse proxy and load balancer for cloud-native operations and containerized workloads. It functions as an edge router that publishes your services to the internet. Traefik routes requests to your containers by matching request attributes such as the domain, URL, and port. The proxy incorporates automatic service discovery so you can add new containers in real-time, without restarting the Traefik service. In this guide, we’ll put together a simple Traefik v2 deployment that will publish multiple Docker containers. This lets you use one Docker installation to provide several services over the same port, such as a web application, API, and administration panel.

  • How to convert Centos 8 Linux to Alma Linux 8

    CentOS Linux 8 was discontinued at the end of 2021. Check out more information about that in this in this article CentOS Linux 8 will end in 2021 and shifts focus to CentOS Stream. The team at CentOS decided to shift focus to CentOS stream, an upstream version of RHEL. CentOS stream places itself between Fedora Linux and RHEL. It is not 100% RHEL clone but ahead of RHEL development. Other distros that are 100% compatible with RHEL 8 have come up including Rocky Linux and Alma Linux. In this guide, we will learn how to convert an existing CentOS 8 distribution into Alma Linux without reinstalling a new operating system. The Alma Linux team provides an automated script for this purpose. An in-place upgrade does not require formatting of hard disk and due to that fact all settings, programs, and files on your current CentOS 8 system will be preserved.

  • LFCS – Creating LDAP on Ubuntu | Linux.org

    I hope you have looked over the previous article to set up OpenLDAP on CentOS 7 system found here. This will build on that article somewhat. We are going to install and configure OpenLDAP on Ubuntu and create an initial database. I did not do some things done here in the previous article, so you may learn something useful here for CentOS or Ubuntu.

Proprietary Software and DRM

  • Best Free and Open Source Alternatives to Atlassian Bitbucket

    Atlassian Corporation Plc is a software company founded in 2002 that develops products for software developers, project managers and other software development teams. It employs over 7,000 people and is headquartered in Sydney, Australia. Atlassian produces a range of proprietary software including software for collaboration, development, and issue tracking software for teams. Atlassian dominates several markets where it still has intense competition. Broadly speaking, they offer software in three large buckets: These are software development tools; help desk software, or IT service management; and workflow management software. When you think of Atlassian, think project management and collaboration tools. Many of their programs use a number of open source components. And their GitHub repositories hold lots of open source code. But their main range of software is proprietary. This series looks at free and open source alternatives to Atlassian’s products.

  • Obsidian is a Notion Alternative for Hardcore Markdown Users for Creating Knowledge Graph of Notes [Ed: Why does a site that calls itself "It's FOSS" so enthusiastically promote non-FOSS? And not the first time, either]

    Initially, I thought that Obsidian was an open source software. It was only when I was looking for their source code repository (after I finished writing this article) that I realized it is free-to-use application but not FOSS (free and open source software). Which is a shame because it’s a damn good application and hence I continued to feature it here.

  • Digital Right to Repair Coalition Letter of Support: SMART

    On behalf of the Digital Right to Repair Coalition (“The Repair Association”), an organization representing over 400 member companies across a variety of industries, I’m writing to ask for your support of consumer choice and right to repair by advancing H.R.3664 – Save Money on Auto Repair Transportation (SMART) Act. The Repair Association is centered around a simple principle: consumers should have the right to repair the products they own. We believe that competition is an essential component of any market, including automotive repairs, and is better for consumers. We are dedicated to fighting against anti-competitive practices that stifle innovation, restrict small businesses, and disadvantage consumers, regardless of industry. Right to repair is a growing, consumers-first movement that is expanding as more people recognize that the law should put consumers first. The growing momentum around repair restrictions for electronics and consumer appliances has spurred companies like Microsoft and Apple to commit to taking action to expand their repair offerings. There’s much more work to be done. According to a new national survey from the CAR Coalition, an overwhelming majority (78%) of vehicle-owning voters support the federal right to repair legislation that protects against design patent abuse in the automotive industry, such as the SMART Act, and makes vehicle data more readily available. The Repair Association believes the SMART Act is an essential step forward in answering consumers’ call for stronger right to repair protections in the automotive repair industry and would serve as an example to other industries.