Language Selection

English French German Italian Portuguese Spanish

DSL 2.1r1 on old Laptop

Filed under
Linux
Reviews
-s

The developers of Damn Small Linux have announced the availability of the first release candidate of version 2.1. My gentoo install is quite dated on my aging laptop, and due to speed and other certain hardware considerations (like a whiny harddrive after a couple hours of compiling), it isn't likely to be updated again. I decided to see if dsl could run on this ancient Dell laptop.

Damn Small Linux is a damn small linux distribution, literally. For those who don't know, it's a 50mb livecd that is also installable onto your harddrive or an usb key. It's a fully functional system consisting of an graphical interface featuring the fluxbox window manager and many useful applications and utilities/tools.

The Change log for 2.1r1 includes:
1. Improved SATA boot time support (see f3)
2. USB 2.0 boot time support fixed typo
3. Torsmo replaces asmem, wmcpuload, & wmnet to better support both window managers.
4. Ted replaces Flwriter
5. Updated xtdesk improved dragging when double click enabled.
6. New Icontool GUI controls many icon features.
7. Added missing tools section to jwm menu.

Well, the first test, to see if it would boot with only 80mb ram.

I needed to download and dd the bootfloppy img due to the fact that this laptop is so old, it doesn't support booting from the cdrom. How long before it's a fish sinker? Well, that may be inevitable, but it's not a fact today. My old laptop did in fact boot dsl on a p1 with only 80mb ram. However, (you knew there was a however, right?), the video/display wasn't very readable when just hitting enter at the boot prompt. I decided to reboot and try some of those fb modes the F2 options screen suggests is for laptops. Crossing my fingers I tried fb1024x768. When that didn't work, I tried fb800x600. That was the ticket. I was in. I was thrilled. I was comforted by the telltale "beep, beep" of the pcmcia network being activated (although it turned out to be short-lived). Then I was asked about which x server module to use, xvesa or xfbdev. I chose xfbdev and was asked about my lang and mouse. At the answering of those questions, X started and looked beautiful and my scroll ball mouse device worked too. Damn Small Linux scores again!

        

Fly in the ointment:

My old and commonly recognized pcmcia wireless network card (linksys wpc11 rev3 that uses orinoco) was incorrectly detected as some Bromax unsupported/unknown card. One can modprobe orinoco and it'd get loaded without error. Still no wlan or eth0 device was available. Also not correctly setup was my netgear FA411 wired pcmcia netcard (that uses 8390). However, we did have some luck with a 3Com/Megahertz 3CCFEM556B. So, whoops. One strike against. Have to, a laptop just isn't any fun if the wireless doesn't work. It's not just me, please see this post for confirmation.

Sound is another small issue. Actually it isn't. It wasn't correctly detected or setup, but in all fairness, it never is. It works fine in Linux, but I have to pass some specific options to the kernel for it to work. It's an old dell latitude XPIcd and I always have to use /sbin/modprobe sb io=0x230 irq=5 dma16=5. I can't tell you how long I spent finding that solution my first Linux install on this thing! Big Grin So, we'll give dsl the brownie point there.

But how would it perform on such a low resource system?

Well, overall, most excellent. Most light applications, like emelfm, Ted or xpaint opened within a few seconds. Dillo took about 9. Sylpheed required 3 or 4. However, mozilla took about 70 seconds to open and another 4 or 5 to render the dslos.com start page. It took about 6 second to render other sites at that point and there was a marked delay or unevenness (is that a word?) with scrolling. Of course, this isn't really a reflection on damn small, just an interesting note. Another thing, xmms was running at the time, which was requiring some cpu cycles to stream that default classical station it was playing. In addition, we're still running from the livecd at this point as well. I'd have to install Opera if I was going to install this onto my hard drive for sure, but given the fact that the pcmcia stuff is somewhat broken, I think I'll forgo the install and wait for the next rc.

        

Conclusion:

I found dsl to work rather well on this old laptop. Applications functioned well and looked quite nice, save mozilla. The video was great looking, the mouse device, cdrom and floppy worked fine of course, and the sound works with a bit of nudging. Some pcmcia cards work and some that should don't. The torsmo looked and worked great. I never did find that gui icontool in the menu (oh, ok, founnd it... hey, that's neato). In addition, I think there should be some kind of battery monitor. Once they sort out the pcmcia stuff, I'm sure it would perform much better from the harddrive.

        

Re: A wonderful review on DSL ?

atang1 wrote:

Its wonderful and tell tale DSL install.

Love your review of DSL.

Yeah, I'm going to soon replace gentoo with a binary distro and I think dsl will be the one.

Thanks for saying! I suffered with the "butterfly syndrome" as I hit submit, as I often do. I appreciate it. Smile

great review... UPDATE .....

UPDATE...

Added 128 mb of memory for a total of 160mb.

DSL now loads and works like a hot damm. Even found an older PCMCIA 3com network card and I had connectivity. Looks like the perfect distro for this laptop. Never would have beleived it if I hadn't tried it.

Nick

But tried it on a compaq presario 1200 with 32 meg mem. (k6 475 mhz processor)and it was next to useless. It booted up but took way too much time to get anything running.

Will try to upgrade the memory to 128m and try again

Nick

Great review but... Sorry for the duplicate...

DSL has lots of trouble on a compaq presario 1200 k6 475 with 32 m memory.

DSL boots up but just thrashes away continously. Got to find a 128 meg memory module to add or else its a doorstop.

nicsmr

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

Meet the GNOMEies: Max Huang

Max Huang has been GNOME since 2010, starting with forming a GNOME users group in Taiwan. Max has a story you may understand: being a user, meeting the right person, and slowly finding yourself more and more deeply involved with a community in terms of working together and making friends. Read more

Review: Raspberry Pi 4

The Raspberry Pi began life as a hacker's dream: a cheap, low-power, highly extendable, hackable PC that shipped as a bare circuit board. Intended as one part educational device, one part tinkering tool, it became something of a phenomenon that has been used to power everything from scaled-down Mars rovers to millions of science and hackday experiments in schools around the world. Read more

Debian: No longer a “Universal” operating system

The Debian project has removed support for the MIPS architecture. This is the latest CPU architecture to be removed from Debian, betraying their tagline of being “The Universal Operating System”.

I take issue not only with their removal of the MIPS architecture, but of their reasoning for doing it.

Read more

today's leftovers

  • Google's Chrome OS 76 Improves Support for Multiple Accounts on Chromebooks

    Google promoted the Chrome OS 76 operating system for supported Chromebook devices to the stable channel, and it is now rolling out to users from around the world with new features and improvements. Based on the latest Google Chrome 76 web browser release, which brings many new features and improvements on its own, Chrome OS 76's probably most exciting is a unified account management for those who use multiple Google accounts on their Chromebook, either by you or if the devices is shared with other people. Users can check out the new account management feature under Settings > Google Accounts, and they should keep in mind that they can now apply all the permissions and access granted to apps, add-ons, websites, Google Play, and in Chrome to all of their signed-in Google accounts. [...] Chrome OS 76 is now rolling out to all supported Chromebook devices. You can update your Chromebook to Chrome OS 76 by going to Chrome settings and accessing the About Chrome OS section. The new version will be automatically downloaded and installed on your Chromebook. A restart is required for Chrome OS 76 to be successfully installed.

  • Netrunner 19.08 Run Through

    In this video, we are looking at Netrunner 19.08.

  • Asterisk Celebrates 25 Million Downloads

    Sangoma Technologies Corporation (TSX VENTURE: STC), a trusted leader in delivering Unified Communications solutions for SMBs, Enterprises, OEMs, and Service Providers, both on-premises and in the cloud, today announced that September will mark the 25 millionth download of Asterisk, the world's most widely used open source communications software.

  • Mozilla Mornings on the future of EU content regulation

    On 10 September, Mozilla will host the next installment of our EU Mozilla Mornings series – regular breakfast meetings where we bring together policy experts, policymakers and practitioners for insight and discussion on the latest EU digital policy developments. The next installment will focus on the future of EU content regulation. We’re bringing together a high-level panel to discuss how the European Commission should approach the mooted Digital Services Act, and to lay out a vision for a sustainable and rights-protective content regulation framework in Europe.

  • FreeIPMI 1.6.4 Released

    o In libfreeipmi, add additional workarounds for packets that are re-ordered during sensor bridging. o In libfreeipmi, add additional sensor / event interpretations. o In libfreeipmi, fix error return value on bridging requests. o Add workaround in ipmi-sel for QuantaPlex T42D-2U motherboard, whichlists a SDR record that makes no sense. o Add workaround for Dell Poweredge FC830, which have an error when reading the last SDR record on a motherboard. o Support Supermicro X10 OEM dimm events.

  • The world’s first mobile phone type crypto digital currency hardware cold wallet officially opened source code

    Recently, the world's first mobile phone type crypto digital asset hardware cold wallet SAFEGEM officially opened source code [...] The cryptography-based blockchain technology is characterized by openness, transparency, and traceability. As an crypto digital asset management system based on blockchain applications, it should have the same characteristics and should have higher security. Therefore, the SAFEGEM development team decided to open up all source code, open source follows the GPL agreement, defines the business boundary, uses open source code for commercial use, and chooses not to open source.

  • Western Digital's Long Trip from Open Standards to Open Source Chips

    It started as a microprocessor pioneer in the 1970s. Now, the company is charting a new course in open source silicon.

  • Excellent Free Books to Learn Go

    Go is a compiled, statically typed programming language that makes it easy to build simple, reliable, and efficient software. It’s a general purpose programming language with modern features, clean syntax and a robust well-documented common library, making it a good candidate to learn as your first programming language. While it borrows ideas from other languages such as Algol and C, it has a very different character. It’s sometimes described as a simple language. Go is an open source project developed by a team at Google and many contributors from the open source community. Go’s first release was in 2009, and it’s distributed under a BSD-style license. This article selects the best open source books that will give readers a firm foundation in developing Go applications.

  • Corner cases and exception types

    Some unanticipated corner cases with Python's new "walrus" operator—described in our Python 3.8 overview—have cropped up recently. The problematic uses of the operator will be turned into errors before the final release, but just what exception should be raised came into question. It seems that the exception specified in the PEP for the operator may not really be the best choice, as a recent discussion hashed out.

  • Dirk Eddelbuettel: Rcpp now used by 1750 CRAN packages

    Since this morning, Rcpp stands at just over 1750 reverse-dependencies on CRAN. The graph on the left depicts the growth of Rcpp usage (as measured by Depends, Imports and LinkingTo, but excluding Suggests) over time. Rcpp was first released in November 2008. It probably cleared 50 packages around three years later in December 2011, 100 packages in January 2013, 200 packages in April 2014, and 300 packages in November 2014. It passed 400 packages in June 2015 (when I tweeted about it), 500 packages in late October 2015, 600 packages in March 2016, 700 packages last July 2016, 800 packages last October 2016, 900 packages early January 2017, 1000 packages in April 2017, 1250 packages in November 2017, and 1500 packages in November 2018. The chart extends to the very beginning via manually compiled data from CRANberries and checked with crandb. The next part uses manually saved entries. The core (and by far largest) part of the data set was generated semi-automatically via a short script appending updates to a small file-based backend. A list of packages using Rcpp is availble too. Also displayed in the graph is the relative proportion of CRAN packages using Rcpp. The four per-cent hurdle was cleared just before useR! 2014 where I showed a similar graph (as two distinct graphs) in my invited talk. We passed five percent in December of 2014, six percent July of 2015, seven percent just before Christmas 2015, eight percent last summer, nine percent mid-December 2016, cracked ten percent in the summer of 2017 and eleven percent in 2018. We are currently at 11.83 percent: a little over one in nine packages. There is more detail in the chart: how CRAN seems to be pushing back more and removing more aggressively (which my CRANberries tracks but not in as much detail as it could), how the growth of Rcpp seems to be slowing somewhat outright and even more so as a proportion of CRAN – just like one would expect a growth curve to.

  • GSoC final report

    The idea of this GSoC project was to implement new Domain-Specific language for LibreOffice to be used in UI testing by logging the user interactions with LO applications then generate the python code needed for the python UI framework which asaswill make testing easier. Also, the project aims to improve the logger that logs all the user interaction to be logged in the new DSL syntax to be more readable. Then we can use this replaying all the user interactions as a UI test.

  • Day 88 [Ed: Karina Passos on her time in KDE GSoC]

    Today, I’ll talk about my GSoC experience and won’t focus so much on Khipu, even because i still have some things to do, so in the next days I’ll publish a post about Khipu and what I’ve done. As I said in the old posts, the begin was the most complicated part for me. I made a project thinking that I’d be able to complete, I started studying the code and the things I’d make many weeks before the start. But I couldn’t understand the code and I think it’s my fault. I even lost three weeks after the start stuck in this situation. It was hard for me, because I was really scared about failing and at the same time dealing with my college stuff, because in Brazil, our summer (and our summer vacation), is in December-February, in July we have a three week vacation, but GSoC lasts three months. I wasn’t having a good time at college as well, but with the help of my therapist and my mentors I found a way to deal with the both things and as everything went well. After this complicated start, to not fail, my mentor suggested that I could change my project. My initial project was to create new features to Khipu and Analitza (Khipu’s main library) to make it a better application and move it out from beta. Then, my new project was to refactor Khipu (using C++ and QML). I was scared because I didn’t know if I’d be able to complete it, but the simplicity of QML helped me a lot, and before the first evaluation (approx. two weeks after I decided my new project) I finished the interface, or at least most of it. [...] And, of course, I’d like to say to KDE, Google and my mentors: thanks for this opportunity.

  • How To Check Your IP Address in Ubuntu [Beginner’s Tip]
  • Phoronix Test Suite 9.0 Milestone 2 Released, OpenBenchmarking.org Serves 42 Millionth Download

    The second development release of the forthcoming Phoronix Test Suite 9.0-Asker is now available for testing. Phoronix Test Suite 9.0 Milestone 2 continued evolving the brand new result viewer being introduced with PTS 9.0 and various new graphing visualizations. Various fixes and other improvements have landed into this new release. Screenshots and more details on the new result viewing experience soon.